20150327

謹言慎行

謹言慎行




中國字的奧妙在於:組合

謹言慎行這四個字,更是妙。

人在江湖混哪有不挨刀, 明刀暗箭防不勝防,

謹言慎行 切記切記。

------------------------------
Enson.

20150319

The Cold Orbital Forging Die and Process Design of a Hollow-ring Gear Part

J. J. Sheu, C. H. Yu (2007) The Cold Orbital Forging Die and Process Design of a Hollow-ring Gear Part, Proceedings of the 35th International MATADOR Conference 2007, pp 111-114.

 ------------------------------

Abstract

In this paper, the cold orbital forging die is designed to make a hollow ring gear part. The forging process with suitable preform design is proposed to obtain the sound cold orbital forging gear part. Different preform designs have been studied to find out the deformation characteristic of the orbital forging process. The dimensions of height and outer diameter of a preform design are considered as the main design parameters. The 3D FEM simulation has been adopted to evaluate the process and die design, and predict the forging loads. The Cockroft-Latham damage criterion has been adopted to evaluate the quality of the product. The upsetting tests of workpiece SCM415 have been carried out to obtain the flow stress model. A PXW-200 orbital forging press has been adopted to do the experimental tests. The top die is rotating in the orbital motion way, and the bottom die only has translational motion. The circular locus is chosen to guarantee the gear shape can be forged precisely. The conventional closed die forging results have been compared with the orbital forging. The forging load of conventional forging is about three times of the orbital forging. The orbital locus shows a better ability of die filling at the finishing than the conventional forging. The simulation results are in good agreement with the experimental tests. The von Mises stress, effective strain, and damage value of the workpiece have been studied to develop a better forging die and process design.
------------------------------
Enson.

20150308

國際婦女節-歷史沿革

國際婦女節[1]

國際婦女節(中國大陸稱「三八」國際婦女節或國際勞動婦女節);在每年的3月8日
慶祝婦女在經濟、政治和社會等領域做出的重要貢獻和取得的巨大成就而設立的節日。
--------------------------------------------------

歷史沿革

20世紀初,最先產生設立國際婦女節的想法,
當時西方各國正處在快速工業化和經濟擴張階段。
惡劣的工作條件低廉的工資使得各類抗議和罷工活動此起彼伏。
----
1857年,3月8日,美國紐約的製衣和紡織女工走上街頭,
抗議惡劣的工作條件和低薪。
----
1908年,當時有將近15000名婦女走上紐約街頭,
要求縮短工作時間,增加工資和享有選舉權等,
並喊出了象徵經濟保障和生活質量的「麵包加玫瑰」的口號。
----
1909年,2月28日,首次慶祝婦女節,當時美國社會黨發表了一項宣言,
號召在每年2月的最後一個星期日舉行紀念活動。
這樣每年的慶祝活動一直持續到1913年。
----
1910年,第二國際在丹麥哥本哈根召開首屆國際婦女會議。
會上德國婦女運動領袖克拉拉·蔡特金倡議設定一天為國際婦女節,
得到與會代表的積極響應。
----
1911年,3月19日,奧地利、丹麥、德國和瑞士等國,
總共超過一百萬人舉行各種活動慶祝國際婦女節。
6天之後的3月25日,紐約發生了三角工廠火災,
火災吞噬了140多名製衣女工生命,大多數是義大利和猶太移民。
惡劣的工作條件被認為是導致此重大傷亡的主要原因。
----
1913年,3月8日,第一次世界大戰爆發前夕,
歐洲的婦女走上街頭,通過舉行和平集會等形式反對戰爭。
----
1917年,3月8日,當時俄國婦女舉行罷工,要求得到「麵包與和平」。
4天後,沙皇被迫退位,俄國臨時政府宣佈賦予婦女選舉權。
十月革命成功之後,布爾什維克的女權活動家亞歷山德拉·科倫泰說服列寧,
將3月8日設為法定假日。蘇聯時期,每年都會在這天紀念「英雄的婦女工作者」。
----
1960年代,隨著女權運動的興起,又逐漸恢復國際婦女節的紀念活動。
----
1975年,聯合國從國際婦女年開始,每年於3月8日舉辦活動慶祝國際婦女節 [2]。

--------------------------------------------------

Reference

[1] 國際婦女節,維基百科,http://goo.gl/AM8F
[2] 聯合國,國際婦女節,http://www.un.org/zh/events/womensday/

--------------------------------------------------
Enson.

20150306

柴靜 - 穹頂之下

柴靜 - 穹頂之下
----------------------------------------------------------------------

 
----------------------------------------------------------------------
Enson.

20150303

高雄應用科技大學 - 論文比對系統 (TurnItIn)

高雄應用科技大學 - 論文比對系統 (TurnItIn)

系統名稱 = Turnitin 論文原創性比對系統

鏈接網址 = http://www.turnitin.com/zh_tw/

--------------------------------------------------

帳號申請流程:

-1. 至 http://goo.gl/KVtP72 填寫使用賬號申請單,需1-3天進行資格審核。

-1.1. 填寫:姓名、聯絡電話、學號、科系、指導教授姓名。

-2. 通過審核後,系統將以 email 發送帳號密碼,再進入Turnitin 進行論文比對。

--------------------------------------------------

Enson, C-H, Yu, Ph.D.

--------------------------------------------------

20150302

熱間鍛造溫度 (Temperatures of Hot forging )

熱間鍛造溫度 (Temperatures of Hot forging) [1]
--------------------------------------------------

 鋼   種 , 加 熱 / 加工後溫度 (* C) |
--------------------------------------------------
 普通鋼 , 1250 / 850
 合金鋼 , 1250 / 850
 鎳鉻鋼 , 1200 / 850
 不銹鋼 , 1200 / 900
 工具鋼 , 1150 / 900
 高速鋼 , 1250 / 950
 彈簧鋼 , 1150 / 900
--------------------------------------------------
 
 鋁   種 , 加 熱 / 加工後溫度 (* C) |
--------------------------------------------------
 杜拉鋁 ,   550 / 400
--------------------------------------------------

 銅   種 , 加 熱 / 加工後溫度 (* C) |
--------------------------------------------------
 黃銅 (6:4) , 750 / 500
 黃銅 (7:3) , 850 / 700
--------------------------------------------------


REFERENCE
[1]林昇立,向四海 (1992) 塑性加工學, 新科技書局,  台北市。
--------------------------------------------------
Enson, Cheng-Hsien Yu, Ph.D.